The Wire rope clamp (also known as the Steel Wire rope chuck) has a rope end fixed or connected function, it is often used with the wire rope, suitable for cranes, mining transportation, shipbuilding and construction and other heavy duty conditions. If it is not professional to do this kind of work people may not be very familiar with these things, but it doesn't matter, if you want to know the specific information of wire rope clips, such as the type of wire rope clips, the use of methods, notes, etc., Wire rope clip please follow the small series to read the following article, I believe the following information will help you.
Wire Rope Clamp Category: Common in the market are carbon steel casting process, the national standards, casting steel wire rope head can be used. However, Wire rope clip with the development of modern industrialization, casting steel wire rope chuck due to the natural process of some defects (pores, cracks, sand), in the humid, acidic alkaline, impact frequency and other special occasions, should be used cautiously.
The use of wire rope clamp: First, carbon steel wire Rope card head is commonly used static tie knot, rope cable fastening, such as power, communication lines, strapping fastening and so on. Forged Steel wire Rope chuck is often used for hoisting and carrying, such as all kinds of engineering hoisting machinery, Wire rope clip metallurgical mining equipment, oil field Derrick, port railway loading and unloading, forestry machinery, power equipment, aviation and sea, land transport, engineering Rescue, salvage wreck, mining enterprises lifting, hoisting, traction rigging. Stainless steel wire Rope chuck because of its corrosion resistance, not easy to rust, Wire rope clip it is used in the ship parts, chemical plants, radiation and other environments. Second, characteristics: and steel wire rope strength, the use of safety, beautiful appearance transition smooth, lifting work safety load, can combat impact load, long service life.
Method of using wire rope clamp:
1. The clamp shall be fastened to the working section of the Wire rope, and the U-shaped screw is fastened on the tail section of the wire rope. 2. The wire rope clamp shall not be arranged alternately on the wire rope. 3. The distance between the clamps is equal to 6-7 times the diameter of wire rope. 4. Fastening the clamp should consider the reasonable force of each clamp, Wire rope clip the rope clip farthest from the ring should not be fastened first alone
The clamp seat shall be fastened on the working section of the Wire rope, the U-shaped bolt is fastened on the tail section of the wire rope, and the wire rope clamp shall not be arranged alternately on the wire rope.
The wire rope clamp should be noticed when using:
(1) The method of steel wire clamp is to fasten the clamping seat on the working section of the Wire rope, the U-shaped bolt is fastened at the end of the wire rope, and the wire rope clamp shall not be arranged alternately on the wire rope. (2) The minimum number of wire rope clips required for each connection. Wire rope clip When the wire rope is properly disposed, the strength of the fixed place is at least 80% of the wire rope's own strength, and the rope clamp is tightened further after 1 and 2 times in the actual use process. (3) The rope clip closest to the sleeve ring should be as close to the sleeve ring as possible, and when fastening the clamp, Wire rope clip the reasonable force of each clamp should be considered, and the rope clip farthest from the sleeve ring should not be fastened first alone. (4) In order to facilitate the inspection of the joint, can be at the end of the last clip about 500mm at a clip head.
The strength of the wire rope clamping fixture is determined by the proper arrangement of the rope clamp on the wire rope, as well as the cautious and skillful degree of fastening and clamping of the rope clamp. Improper fastening nut or the number of wire rope clips may make the rope end in the load, the first to produce a sliding. If the clamp is properly arranged and clamped in accordance with the recommended quantity, and all the clamps place the clamp seat on the longer part of the wire rope, and the U-shaped bolt is placed in the shorter part or tail section of the wire rope, the strength at the fixed place is at least 80% of the wire rope's strength. In practical use, the secondary shall be inspected after loading, and in most cases the nut needs to be tightened further.
Fastening the steel wire clamp should consider the reasonable force of each clamp, the rope clip farthest from the sleeve ring shall not be fastened first alone. The nearest rope clamp (the first clamp) should be as close to the ring as possible, but the correct tightening of the clamp must be ensured and the outer wire of the wire rope must not be damaged.