Model NO.: carbide
Certification: ISO
Model Number: 64.95-56.05-65.00
Name: Tungsten Carbide Sleeves
Trs: 3000ksi
Material: 100% Raw Materials
Advantage: Over 20 Years Experience in This Line
Specification: ISO9001 SGS
Type: Tungsten Carbide Sleeves
Place of Origin: Zhuzhou China (Mainland)
Alloy Specification: K10 K20 K30
Hardness: 92.5-93.5hra
Performance: Excellent Wear Resistance
Business Type: Manufacturer
Trademark: OEM
Origin: Qingdao, China
Grade | Binder (Wt%) | Density (g/cm3) | Hardness (HRA) | TRS (over N/mm2) |
YG6 | 6 | 14.8 | 90.0 | 1520 |
YG6X | 6 | 14.9 | 91.0 | 1450 |
YG6A | 6 | 14.9 | 92.0 | 1540 |
YG8 | 8 | 14.7 | 89.5 | 1750 |
YG12 | 12 | 14.2 | 88.0 | 1810 |
YG15 | 15 | 14.0 | 87.0 | 2050 |
YG20 | 20 | 13.5 | 85.5 | 2450 |
YG25 | 25 | 12.1 | 84.0 | 2550 |
Grade | Density g/cm3 | T.R.S MPa | Hardness HRA | Performance & Application recommended |
YG6 | 14.9 | 2150 | 89.5 | Qalified for finish machining and semi-finished machining for the cast iron,non-ferrous metal, alloy and unalloyed materials. |
YG6X | 14.9 | 1560 | 91 | Qualified for machiningof chilled cast iron, alloy cast iron,refractory steel ana alloy steel. Also qualified for the machining of common cast iron. |
YG6A | 14.8 | 1580 | 91 | |
YG8 | 14.7 | 2320 | 89.5 | High bending strength,wear resistance lower than YG6A,used for processing blades,wear resistance parts etc. |
YG11C | 14.4 | 2260 | 87.5 | Qualified for molding the drills for heavy-duty rock drill:detachable bits used for deep hole drilling,rock drill torlley etc. |
YG15 | 14.0 | 2500 | 87.5 | Used for punch dies,stamping dies and wear resistance parts. |
YS2T | 14.5 | 2800 | 92.5 | Qualified for low speed rough machining,milling, titanium alloy and refractory alloy,espercially for cut-off tool and sick prick. |
YL10.2 | 14.5 | 3400 | 92.5 | |
YG20 | 14.6 | 2480 | 83.5 | Qualified for making dies with low impact such as punching watch parts,battery shells,small screw caps etc. |