American jaw and eye turnbuckle using screw retractable, can adjust the rope tightness. Components can be bundled during component transport and loose during installation and calibration. The utility model is composed of a regulating rod, a nut and a pull rod which are provided with a left-hand...
American jaw and eye turnbuckle using screw retractable, can adjust the rope tightness. Components can be bundled during component transport and loose during installation and calibration.
The utility model is composed of a regulating rod, a nut and a pull rod which are provided with a left-hand thread and a right-hand thread. The regulating rod is also composed of a theft-proof and anti-loosing device which is integrally connected with the cover plate, the fixing plate and the guard plate. Use must use special supporting sleeve to unscrew the anti-theft locking bolt, the security effect is good, safe and reliable. After the anti-theft locking device is disassembled, it is not necessary to take it down and use the ring guide on it to slide along the rod and move it for a distance to adjust and operate.
Drop Forged Turnbuckle Jaw & Eye
Conforms to Federal Specification FF-T-791b, Type 1, Form 1 - Class 8
* Hot Dipped Galv.
* End fittings are quenched and tempered, bodies are normalized
* Proof Load is 2.5 times Working Load Limit
* Ultimate Load is 5 times Working Load Limit
Thread Dia | W.L.L | Weight | Dimensions (in) | |||||||||
& Take Up | (Lbs) | Each (Lbs) | A | B | C | D | E | F | G | H | K | P |
Open | Closed | Closed | Closed | |||||||||
1/4 x 4 | 500 | 0.32 | 0.25 | 0.41 | 0.62 | 12.07 | 8.07 | 1.58 | 4.00 | 0.78 | 0.34 | 1.75 |
5/16 x 4 1/2 | 800 | 0.47 | 0.31 | 0.47 | 0.87 | 14.01 | 9.51 | 1.98 | 4.50 | 0.94 | 0.44 | 2.09 |
3/8 x 6 | 1200 | 0.76 | 0.38 | 0.50 | 0.87 | 17.77 | 11.77 | 2.12 | 6.00 | 1.12 | 0.53 | 2.52 |
1/2 x 6 | 2200 | 1.53 | 0.50 | 0.63 | 1.06 | 19.48 | 13.48 | 2.75 | 6.00 | 1.44 | 0.72 | 3.23 |
1/2 x 9 | 2200 | 1.71 | 0.50 | 0.63 | 1.06 | 25.48 | 16.48 | 2.75 | 9.00 | 1.44 | 0.72 | 3.23 |
1/2 x 12 | 2200 | 2.06 | 0.50 | 0.63 | 1.06 | 31.48 | 19.48 | 2.75 | 12.00 | 1.44 | 0.72 | 3.23 |
5/8 x 6 | 3500 | 2.35 | 0.63 | 0.75 | 1.31 | 21.28 | 15.28 | 3.50 | 6.00 | 1.75 | 0.88 | 3.90 |
5/8 x 9 | 3500 | 3.06 | 0.63 | 0.75 | 1.31 | 27.28 | 18.28 | 3.50 | 9.00 | 1.75 | 0.88 | 3.90 |
5/8 x 12 | 3500 | 3.78 | 0.63 | 0.75 | 1.31 | 33.28 | 21.28 | 3.50 | 12.00 | 1.75 | 0.88 | 3.90 |
3/4 x 6 | 5200 | 4.00 | 0.75 | 0.94 | 1.50 | 23.11 | 17.11 | 4.18 | 6.00 | 2.09 | 1.00 | 4.69 |
3/4 x 9 | 5200 | 4.75 | 0.75 | 0.94 | 1.50 | 29.11 | 20.11 | 4.18 | 9.00 | 2.09 | 1.00 | 4.69 |
3/4 x 12 | 5200 | 5.36 | 0.75 | 0.94 | 1.50 | 35.11 | 23.11 | 4.18 | 12.00 | 2.09 | 1.00 | 4.69 |
3/4 x 18 | 5200 | 7.00 | 0.75 | 0.94 | 1.50 | 47.11 | 29.11 | 4.18 | 18.00 | 2.09 | 1.00 | 4.69 |
7/8 x 12 | 7200 | 8.00 | 0.88 | 1.13 | 1.75 | 36.57 | 24.57 | 4.85 | 12.00 | 2.38 | 1.25 | 5.10 |
7/8 x 18 | 7200 | 9.75 | 0.88 | 1.13 | 1.75 | 48.57 | 30.57 | 4.85 | 18.00 | 2.38 | 1.25 | 5.10 |
1 x 6 | 10000 | 8.92 | 1.00 | 1.19 | 2.06 | 26.89 | 20.89 | 5.53 | 6.00 | 3.00 | 1.44 | 6.36 |
1 x 12 | 10000 | 11.20 | 1.00 | 1.19 | 2.06 | 38.89 | 26.89 | 5.53 | 12.00 | 3.00 | 1.44 | 6.36 |
1 x 18 | 10000 | 13.30 | 1.00 | 1.19 | 2.06 | 50.89 | 32.89 | 5.53 | 18.00 | 3.00 | 1.44 | 6.36 |
1 x 24 | 10000 | 17.00 | 1.00 | 1.19 | 2.06 | 62.89 | 38.89 | 5.53 | 24.00 | 3.00 | 1.44 | 6.36 |
1 1/4 x 12 | 15200 | 20.00 | 1.25 | 1.75 | 2.81 | 42.05 | 30.05 | 7.21 | 12.00 | 3.56 | 1.81 | 7.72 |
1 1/4 x 18 | 15200 | 24.18 | 1.25 | 1.75 | 2.81 | 54.05 | 36.05 | 7.21 | 18.00 | 3.56 | 1.81 | 7.72 |
1 1/4 x 24 | 15200 | 28.50 | 1.25 | 1.75 | 2.81 | 66.05 | 42.05 | 7.21 | 24.00 | 3.56 | 1.81 | 7.72 |
1 1/2 x 12 | 21400 | 28.99 | 1.50 | 2.06 | 2.81 | 44.25 | 32.23 | 7.88 | 12.00 | 4.06 | 2.12 | 8.62 |
1 1/2 x 18 | 21400 | 35.00 | 1.50 | 2.06 | 2.81 | 56.25 | 38.25 | 7.88 | 18.00 | 4.06 | 2.12 | 8.62 |
1 1/2 x 24 | 21400 | 39.18 | 1.50 | 2.06 | 2.81 | 68.25 | 44.25 | 7.88 | 24.00 | 4.06 | 2.12 | 8.62 |